Yes, you can paint aluminium window frames, and on many Sydney homes painting them is a practical way to bring tired brown, cream or faded frames into line with a new exterior colour scheme. Paint on aluminium needs a clean, sanded surface and a primer made to grip metal, and the frames sit right against glass, rubber seals and sealant that have to stay clean.
Zaf Painting paints garage doors and metal window frames as part of exterior work, so they can be finished in a colour that matches the rest of the house. This guide explains what is usually on your frames now, how a painter prepares and coats aluminium, and what decides how long the new finish looks good.
Key Takeaways
- Aluminium window frames can be painted, but the existing finish has to be cleaned, degreased and sanded so the primer can grip.
- A primer made for aluminium goes on first, followed by enamel topcoats in the colour you choose.
- Rubber seals and sealant around the glass need to stay free of paint.
- Darker colours bring heat related issues, and lighter colours make the corner joins easier to see.
- Painting the frames with the rest of your exterior lets you plan all the colours together.
Can You Paint Aluminium Window Frames on a Sydney Home?
You can. Powder coating is the most common factory finish on aluminium, and anodising is another. Both finishes are tough, and both need preparation before they are painted.
This bulletin on finishing aluminium that sets out the usual approach for painting aluminium: a thorough clean, then an etch primer so the coating adheres, then a primer or undercoat and the finish coats.
Aluminium protects itself with a thin oxide film that forms on the surface when it is exposed to air. On older frames, one paint manufacturer recommends wet sanding to remove that oxide layer along with any corrosion, so the primer has a better key to grip.

What Finish Is on Your Aluminium Window Frames Now?
Before any paint is chosen, the painter needs to know what is already on the frames, because the existing surface decides the preparation and the primer.
- Powder coated frames: Powder coating is the most common finish on aluminium building products. Older powder coat often looks dull, can be chalky to the touch and may have some corrosion showing.
- Anodised frames: Anodising is part of the metal itself rather than a layer sitting on top, so it will not chip or peel off.
- Frames that were painted before: Any flaking or loose paint has to come off and the edges need to be sanded smooth, because the new coats are only as sound as what sits underneath them.
One paint manufacturer recommends different primers for an existing powder coat and for bare or oxidised aluminium, and notes that the preparation and primer depend on the surface and coating already on the window. If your windows are fairly new, it is worth checking with the window supplier before anything is painted. BRANZ advises seeking specialist advice from both the original coating manufacturer and the paint manufacturer before repainting prefinished aluminium.
How a Painter Prepares Aluminium Window Frames for Painting
Preparation comes before any paint goes on, and the guidance from one paint manufacturer for repainting powder coated aluminium joinery sets out these steps.
- Scrub and degrease: The frames are scrubbed with a metal wash to lift chalked paint, dirt, oil and grease.
- Rinse thoroughly: Plenty of clean water removes the cleaner and any remaining contaminants.
- Check the surface is clean: Wiping with clean cotton wool shows whether any grease is left, and the clean is repeated if it is.
- Treat mould: Any moss or mould on the frames is treated before painting.
- Wet sand: On older, dull frames, wet sanding removes corrosion and the oxide layer and gives the primer a better key to grip.
- Protect the seals: The rubber seals and sealant around the glass are kept free of paint.
BRANZ notes that paint can be difficult to get to stick to highly polished aluminium, and that these surfaces should be wet sanded to a matt finish. Where corrosion has already started, BRANZ recommends removing it with wetted stainless steel wool rather than a wire brush, followed by a very thorough rinse.
None of these steps shows once the colour goes on, but the performance of the paint system depends largely on how thorough the surface preparation is.
What Primer and Paint Go on Aluminium Window Frames?
Once the frames are clean and sanded, the coating system has three parts.
- Primer: An etch or adhesion primer made for aluminium goes on first so the paint system bonds to the metal or to the old powder coat.
- Undercoat: A primer undercoat can follow, depending on the system the manufacturer specifies.
- Topcoats: Two topcoats of a water based enamel in semi gloss or gloss finish the frames in your chosen colour.
The sheen is your choice. Semi gloss is the most popular finish for window frames, and a flat finish is harder to keep clean than semi gloss. Whichever sheen you pick, the primer has to suit the surface the painter found when the frames were assessed.

What Affects How Long Painted Aluminium Window Frames Last?
A few things decide how painted aluminium frames age.
- The preparation underneath: Grease, chalk or corrosion left on the frame weakens the bond from the start.
- Damage to the paint film: Painted aluminium can develop a fine, worm shaped corrosion under the paint, mostly where the coating has been chipped or damaged. It is cosmetic and does not significantly weaken the frame, but it does spoil the look.
- Colour choice: Dark colours come with heat related issues, and heat reflective technology is available for darker topcoats to reduce them.
- Corner joins: The mitre joints at the corners of aluminium windows become more noticeable the lighter the colour you choose.
- Ongoing care: A painted system on aluminium needs maintenance over time, starting with regular gentle cleaning.
If you are choosing between a deep charcoal and a lighter grey, it helps to look at a sample against one frame in the light that side of the house gets during the day.
Painting Aluminium Window Frames to Match Your Exterior Repaint
When a house changes colour, a fresh body colour can make old brown or cream frames stand out, and on an older inner west home a set of tired frames can let down a newly painted facade. Painting the frames at the same time means the walls, trims, frames and garage door are planned as one colour scheme.
Our exterior painting service in Sydney covers brick, render, cladding and timber trims, and we add garage doors and metal window frames to the scope when you ask. Let us know which frames you want painted and the colour you have in mind, and we will include them in your written quote. If you live in the inner west, our page on painters in the Inner West explains how we work on the older homes in that area.
Doing the frames yourself is possible, but cleaning, sanding, priming and cutting in two topcoats around every pane while keeping the seals clean is slow, careful work. When a painter is already working on the exterior, the frames can be painted at the same time as the walls and trims.
Frequently Asked Questions About Painting Aluminium Window Frames
Do aluminium window frames need a primer before painting?
Yes. Aluminium needs a primer made for metal, usually an etch or adhesion primer, so the paint bonds to the surface. The topcoats go on over that primer once it has dried.
Can you paint powder coated aluminium window frames?
Yes. Powder coated frames are cleaned and degreased to remove chalk and dirt, sanded to give the primer a key, then primed with a primer suited to an existing coating and finished with enamel topcoats. For newer frames, check with the window supplier or the original coating manufacturer first.
Can you paint aluminium window frames a dark colour like black or charcoal?
Yes, dark colours can be used on aluminium frames. Dark colours come with heat related issues, so heat reflective technology is available for darker topcoats to reduce them. It reduces the heat issues but does not remove them.
How do you look after painted aluminium window frames?
Clean the frames as often as you clean the glass, using a neutral detergent and water. Never clean coated aluminium with abrasive cleaners, cutting compounds or solvent based cleaners.
Can Zaf Painting paint my window frames when we paint the rest of the exterior?
Yes. We paint metal window frames and garage doors as part of an exterior repaint so they match the rest of the house. Tell us which frames and doors you want done when you ask for a quote, and we will add them to the scope.
Booking a Painter for Your Aluminium Window Frames in Sydney
Painting aluminium window frames comes down to the surface underneath. The existing finish decides the preparation and the primer, the preparation decides how well the paint holds, and your colour choice affects how the frames handle heat and how much the corner joins show.
If your frames no longer suit the house, call Zaf Painting on 0416 757 140 or request a free quote. We take calls on weekends too.




